BenQ T3300v, Быстрое руководство

Страница: 23 / 36

23
measurement. The indicators/lines then turn green, and the final measured results (values) appear on
the top left side of the imaging screen.
•
Two-finger tap on the scan area
•
Proceed with the next measurement
•
Touch Save to save the ultrasound image
NOTES
•
To re-position the measured results to the imaging screen’s Left Top , Left Bottom , Right Top , or
Right Bottom side, touch Result Pos +/- .
•
To set whether to show all or the last measured results, or to hide them all, touch Show /- .
•
To delete measurements, touch Erase Measure to erase the last measurement added. Repeat this
action, if needed, to continue erasing measurements.
•
To directly erase all measurements, touch and hold Erase Measure .
•
You can select whether to keep or erase the measurements added after you return to the live scan
by touching > Settings > Workflow > ( Auto-clear Measurement after Unfreeze ) > select an
option.
Measuring in B/Color/Power Modes
Distance
Measure a distance.
1. Touch Distance . A crosshair cursor appears on the image. Touch anywhere on the imaging area to
drag the target cursor to where you want to start measuring and release it.
2. Touch anywhere on the imaging area to drag the target cursor to where you want to finish
measuring, then release it.
Depth
Measure depth.
Touch
Depth . A crosshair cursor appears on the image. Touch anywhere on the imaging area to drag
the target cursor to where you want to finish measuring the depth, then release it.
Ellipse
Measure a circumference.
1. Touch Ellipse . A crosshair cursor appears on the image. Touch anywhere on the imaging area to
drag the target cursor to one end of the area you want to measure and release it to set the start
point of measurement.
2. Touch anywhere on the imaging area to drag the target cursor to the other end of the desired area,
and release it to set the end point of measurement.
3. Touch anywhere on the imaging area and drag out to increase or drag in to decrease the size of
the circle.