32
Using the projector
En
gl
ish
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not suitable for your need.
You can use one of the picture modes (except the selected User mode) as a starting point and customize
the settings.
1. In the
Picture
menu, highlight
Picture Mode
and press / to select
User 1
or
User 2
mode.
2. Press
to highlight
Reference Mode
.
This function is only available when User 1 or User 2 mode is selected up in the Picture Mode sub-menu
item.
3. Press
/
to highlight a picture mode that is closest to your need.
4. Press to select a sub-menu item to be changed and adjust the value with
/
. See
"Fine-tuning
the picture quality" on page 33
and
"Advanced picture quality controls" on page 34
for details.
5. When all settings have been done, press
MENU/EXIT
to save and leave the settings.
Renaming user modes
You can change User 1 and User 2 to the names easy to be identified or understood by the users of this
projector. The new name can be up to 8 characters including English letters (A-Z, a-z), digits (0-9), and
space (_).
To rename user modes:
1. Make sure you have selected
User 1
or
User 2
as your picture mode.
If you are not under User 1 or User 2 mode, the projector will automatically select User 1 as the user mode
to rename.
2. In the
Picture
menu, highlight
Rename User Mode
and press
MODE/ENTER
to display the
virtual keypad.
3. Use
/ / /
and
ENTER
keys to select the letters on the virtual keypad to type in desired name.
4. When done, press
MENU/EXIT
to leave the virtual keypad.
Resetting the picture mode
All of the adjustments you’ve done in the
Picture
menu can be returned to the factory preset values
with a key press on the highlight of
Reset
.
To reset the picture mode to the preset factory values:
1. In the
Picture
menu, highlight
Picture Mode
and press / to select the picture mode (including
User 1
or
User 2
) you want to reset.
2. Press
to highlight
Reset Picture Settings
and press
MODE/ENTER
.
3. Press /
to
select
Current
or
All
Picture modes and press
MODE/ENTER
. The confirmation
message is displayed.
4. Press /
to
highlight
Reset
and press
MODE/ENTER
. The picture mode will return to the
factory preset settings.
5. Repeat steps 1-4 if you want to reset other picture modes.
Do not confuse the Reset Picture Settings function here with the Reset All Settings in the System Setup:
Advanced menu. The Reset All Settings function returns most of the settings to the factory preset values
system wide. See
"Reset All Settings" on page 58
for details.
Содержание SU931
Страница 1: ...SX930 SU931 Digital Projector User Manual ...
