BenQ ST550K, Руководство пользователя

Страница: 10 / 51

Setting up the display 6
Setting up the display
Mounting the display
You can install the display on a vertical surface with a suitable wall mounting bracket or
on a horizontal surface with the optional desktop stands. Please pay attention to the
following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
Installing the desktop stands
1. Lock the metal support and the iron base tightly with 4 pieces of
Φ
5 × 7 mm flat-
head machine screws until all the screw holes are aligned.
2. Make base pad holes and the screw center aligned and stick them on the metal
support. Be sure to distinguish the installation direction of the right and left base
pads.
3. Lock the base and the base support with 4 pieces of
Φ
4 × (10 + 8) mm H-head
machine screws.
4. Lock the whole base module on the back cover of the machine with 4 pieces of
Φ
4
× 16 mm B-head machine screws.
Metal support
Iron base
Φ 5 × 7 mm screws
Base pad
Base support
Φ
4 × (10 + 8) mm screws
Φ 4 × 16 mm screws