Operation
32
8.
Press
◄
/
►
to select the direction and press
MODE/ENTER
.
9.
Press
▲
/
▼
to adjust the top or/and bottom side convex
or concave. Default is 0 and value is -40~0~40. Single side
adjustment is only for distortion.
10. For both sides of the vertical surface fit, use
◄
/
►
to
adjust the center of the curve because it is not always at
the center. Default is 0 and value is -40~0~40.
• Using the
QUICK INSTALL
key
1.
Press
QUICK INSTALL
on the remote control.
2.
Press
▼
to highlight
Surface Fit
and press
MODE/ENTER
. The
Surface Fit
page
displays.
3.
Follow the steps 2~9 in the above section.
The function is only available for SW916.
NETWORK
SETTING
