Introduction
16
SW916
1.
ON /
OFF
Toggles the projector between standby
mode and on.
2.
Source selection buttons
Selects an input source for display.
3.
Keystone/Arrow keys (
/
▲
Up,
/
▼
Down,
/
►
Right,
/
◄
Left)
Manually corrects distorted images
resulting from an angled projection.
When the On-Screen Display (OSD)
menu is activated, the #3 keys are used as
a directional arrows to select the desire
menu items and to make adjustments.
4.
MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5.
ECO BLANK
Used to hide the screen picture.
6.
LASER
(No available in Japan region)
Emits visible laser pointer light for
presentation purposes.
7.
QUICK INSTALL ("TEST" is for
Japan region)
Displays the Quick Install OSD menu.
8.
FREEZE
Freezes the projected image.
9.
ASPECT
Selects the display aspect ratio.
10. PIP
The function is not available on this
projector.
11. NETWORK SETTING
Displays the Network Settings OSD
menu.
12. Numeric buttons
Enters numbers in network settings.
Numeric buttons 1, 2, 3, 4 cannot be pressed
when asked to enter password.
13. AUTO
Automatically determines the best
picture timings for the displayed image.
14. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
15. SOURCE
Displays the source selection bar.
16. /VOLUME -
Adjusts the sound level.
17. BRIGHT
Displays the BRIGHTNESS setting bar.
See
"Adjusting Brightness" on page 41
for
details.
18. CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 41
for
details.
NETWORK
SETTING
3
5
11
14
15
17
1
2
3
4
6
13
10
20
3
7
9
16
19
3
12
8
18
