BenQ SE2241, Руководство по обслуживанию изделия

Страница: 21 / 88

21
(7) OSD Control flow
Picture
(For Video
sources)
Picture Mode Picture effect selections on Dynamic (default), Standard, Mild, User
Contrast Adjust the White levels (0~100)
Brightness Adjust the Black levels (0~100)
Colour Adjust the Color levels (0~100)
Tint Adjust the Tint levels (-50~ 0~ + 50)
Sharpness Adjust the Sharpness levels (0~100)
Colour Temperature Color temperature selections on Normal(default), Warm, Cool ,User
Aspect Ratio
Selections the Image Size on Full (default) ,Zoom1, Zoom2,Panorama ,
Auto,and4:3
Backlight Control brightness via back light adjustment
Senseye
ACE Advance Contrast Enhance (Standard/ Low /Off/Auto/ High)
Noise Reduce Noise reduce level setup on Off (default), Low, Middle, High
Skin Tone
Skin color adjust (0~10)
Picture
(Only for PC
input)
Backlight Control brightness via back light adjustment
Contrast Adjust the White levels (0~100)
Brightness Adjust the Black levels (0~100)
Sharpness Adjust the Sharpness levels (0~100)
Colour Temperature Color temperature selections on Normal(default) , Cool , User,Warm,
Aspect Ratio Selections the Image Size on Full (default) , and4:3
Backlight Control brightness via back light adjustment
Auto Adjust To auto adjust picture’s H. / V. Position, phase and clock
H-Position Adjust the horizontal position of image
V-Position Adjust the vertical position of image
Size Adjust the horizontal size
Phase To adjust the delay time of phase to reduce the noise of picture
Audio
Sound Mode Sound effect selections on Standard (default), Music, Movie, Sports,and User
Balance Adjust the Speak output levels (-50~ 0~ + 50)
Bass Adjust the Low Frequency levels (0~100)
Treble Adjust the High Frequency levels (0~100 )
AVC Turn on or turn off the Auto Volume Control
Audio Only Turn on or turn off the audio only function.
Time
Clock Set date and time
Off Time Set a routine time for power off
On Time Set a routine time for power on
Sleep Timer
Set a timer for sleep mode. The power will be turned off if the timer is
timeout
Auto Sleep
If auto sleep is turned on and no input signal, it will go to the sleep mode
after approximately 10 minutes.
Time Zone Time zone selection.