BenQ ScreenBar AR17, Руководство пользователя

Страница: 3 / 13

1 English
Package Contents
Check the packaging for the following items. If any is missing or damaged, please contact the place
of purchase immediately.
The illustrations in this guide are for your reference only and may look different from the
appearance of the actual product.
For Your Safety
• Use only the supplied USB power cable and connect only to USB port power (5V DC, 1A).
Otherwise the lamp will fail to work normally or result in a fire hazard.
• I n order to prevent any damages to the lamp, do not hang or place any objects on the lamp.
• Route the USB power cable so as to avoid it from being pinched by items placed upon it or
against it.
• I f the lamp will not be used for a long period of time, unplug it from the USB port.
Installation
1. As shown in [Figure ], insert the ScreenBar lamp into the clip.
2. Place the ScreenBar lamp with clip on top of your monitor frame [Figures , ].
Note that there should be no visible gap between the clip and monitor frame [Figure ].
The applicable range of the monitor frame thickness is 1cm - 3cm.
3. Connect the micro USB connector of the supplied USB power cable to the micro USB port on
the lamp [Figure ], and the USB connector to the USB port of your computer [Figure
]. The lamp will automatically turn ON upon receiving power from the USB port.
• Do not use a USB extension cable, or a USB cable other than the one supplied. Otherwise the
lamp will not function properly.
• It is recommended that the lamp’s power be supplied by the USB port of your computer. If a
portable power bank or AC power adapter is to be used as the power source for the lamp, the
power output shall meet the requirement (output voltage: 5V, output current: 1A or above) in
order for the lamp to function normally.
Using the Lamp
Turning on/off the Lamp and Entering Auto Dimmer Mode
• ScreenBar lamp x 1 • Clip x 1 • USB power cable x 1
• In case of the following situations, unplug the lamp from the USB port
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
- When the outer casing of the lamp is broken
- When there are strange odors coming from the lamp
- When the LED light source flickers
- When the insulation of the lamp’s wiring is damaged or frayed, and the metal
strings inside can be seen
• Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
• This lamp is designed for indoor use only. Do not use it outdoors.
• N ever disassemble the lamp or remove any components from it, as doing so
may result in accidents and will void the product warranty.
CAUTION
A
B 1 B 2
B 3
C 1
C 2
Turning on/off the Lamp
To turn on the lamp, touch the power button on the lamp. To
turn off the lamp, touch the power button again.
• If the Auto Dimmer Mode indicator flashes, make sure you are using the USB cable that is
provided and no USB extension cable is being used.