Parts of the display and their functions
19
Remote control important notice
1. This remote control applies only to a specific model and/or operating systems. Con-
tact your reseller if you have any question.
2. The function keys can work only when the enclosed dongle is inserted to the BenQ
Interactive Flat Panel.
3. The remote control and the enclosed dongle have been paired by default.
Using the remote control
Installing remote control batteries
Though the remote control dongle can be installed into any of the display’s USB ports, it is
recommended that you install the dongle into one of the USB ports at the bottom of the rear
side of the display.
Dongle
1. Open the remote control battery compart-
ment cover.
2. Insert the supplied batteries ensuring that
the positive and negative marked battery
terminals match the (+) and (-) marks in the
battery compartment.
The supplied batteries are provided for your
convenience so that you can operate the display
straight away. You should replace them as soon as
possible.