Introduction
7
Introduction
Projector features
The projector offers the following features
•
BLANK saves lamp power
By pressing the
BLANK
button to hide the image and immediately lower lamp power
at the same time.
•
USB TYPE B
jack to use the page up/down commands (like Microsoft PowerPoint)
using the remote control when connected a PC.
•
USB TYPE A
jack to support 5V/1.5A output.
•
Less than 0.5W in standby condition
Less than 0.5W power consumption under standby mode.
•
Network Control
Integrated RJ45 connector for wired network control allowing management of
projector status from a computer using a web browser.
•
Crestron RoomView
®
, PJ Link and AMX supported
The projector supports Crestron eControl and RoomView, PJ Link and AMX allowing
you to control and manage equipment from a remote computer via LAN connection.
•
One-key auto-adjustment
Pressing AUTO on the keypad or remote control to show the best picture quality
immediately.
•
Built-in 5W speaker(s)
Built-in 5W speaker(s) providing stereo audio when an audio input is connected.
•
Quick Cooling, Auto Power Off, Signal Power On, Direct Power On, Quick
Cooling
function speeds up the cooling process when turning off the projector.
Auto
Power Off
function allows the projector to turn off automatically if no input signal is
detected after a set period of time.
Signal Power On
function turns on your
projector automatically once detecting COMPUTER-1 or COMPUTER-2 the signal
input and
Direct Power On
boots up the projector automatically when the power is
connected.
•
3D Function supported
Various 3D formats make the 3D function more flexible. By presenting the depth of the
images, you can wear BenQ 3D glasses to enjoy the 3D movies, videos and sporting
events in a more realistic way.
•
The apparent brightness of the projected image will vary depending on the ambient lighting
conditions, selected input signal contrast/brightness settings, and is directly proportional to
projection distance.
•
The lamp brightness will decline over time and may vary within the lamp manufacturers
specifications. This is normal and expected behavior.
