![background image](http://html1.mh-extra.com/html/benq/pm245p01-series/pm245p01-series_installation-manual_2735117009.webp)
Last revised: May 17, 2013
7
SCREWING
SCREWING
SCREWING
SCREWING
Secure the module to the structure using the factory mounting holes. The torque wrench
must be used for assembly. In the examples shown, the tightening torque must be 20N
.
m.
Use the existing holes for securing the module; do not drill any additional holes (doing so will
void the warranty). Use appropriate corrosion-proof fastening materials.
For PM245P01 modules, four stainless steel bolts, with nuts, washers, and lock washers are
recommended per module. Only the existing mounting holes (Diameter: 6.6mm) that can be
used for module to meet 2400Pa design strength under UL 1703,
Figure
Figure
Figure
Figure 3
33
3----3
33
3: Installation of Module (Screwing)
: Installation of Module (Screwing)
: Installation of Module (Screwing)
: Installation of Module (Screwing)