15
Positioning your projector
The current source information will be displayed in the corner of the screen for 3 seconds.
Fine-tuning the image clarity
Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to angled
projection.
To correct this, you will need to manually correct it following these steps.
1. Do one of the following steps to display the keystone
correction page.
• Press
/
on the projector or remote control.
• Press
QUICK INSTALL
on the remote control. Press to
highlight
Keystone
and press
OK
.
• Go to
Advanced Menu - Display
>
Keystone
and press
OK
.
2. After the
Keystone
correction page displays. Press
to correct keystoning at the top of the
image. Press
to correct keystoning at the bottom of the image.
This function is only available when PC signal (analog RGB) is selected.
Sharpen the image by rotating the focus ring.
Press
.
Press
.
