Operation 39
The Color Management provides six sets (RGBCMY) of colors to be adjusted. When
you select each color, you can independently adjust its range and saturation according
to your preference.
If you have purchased a test disc which contains various color test patterns and can be
used to test the color presentation on monitors, TVs, projectors, etc. You can project
any image from the disc on the screen and enter the
3D Color Management
menu
to make adjustments.
To adjust the settings:
1.
Go to the
PICTURE
menu and highlight
3D Color Management
.
2.
Press
MODE/ENTER
and the
3D Color Management
page displays.
3.
Highlight
Primary Color
and press
/
to select a color from among Red,
Yellow, Green, Cyan, Blue, or Magenta.
4.
Press to highlight
Hue
and press
/
to select its range. Increase in the
range will include colors consisted of more proportions of its two adjacent
colors.
Please refer to the illustration to the right
for how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
5.
Press to highlight
Saturation
and
adjust its values to your preference by
pressing
/
. Every adjustment made
will reflect to the image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
Saturation
is the amount of that color in a video picture. Lower settings produce
less saturated colors; a setting of “0” removes that color from the image entirely. If
the saturation is too high, that color will be overpowering and unrealistic.
6.
Press to highlight
Gain
and adjust its values to your preference by pressing
/
. The contrast level of the primary color you select will be affected. Every
adjustment made will reflect to the image immediately.
7.
Repeat steps 3 to 6 for other color adjustments.
8.
Make sure you have made all of the desired adjustments.
9.
Press
MENU/EXIT
to exit and save the settings.
Resetting current or all picture modes
1.
Go to the
PICTURE
menu and highlight
Reset Picture Settings
.
2.
Press
MODE/ENTER
and press / to select
Current
or
All
.
•
Current
: returns current picture mode to the factory preset settings.
•
All
: returns all settings, except
User 1/User 2
in the
PICTURE
menu to
the factory preset settings.
RED
BLUE
GREEN
Yellow
Cyan
Magenta
