Projecting via QCast (for PCs)
20
5.
If the projector successfully connects to the wireless network, a message will appear
instructing you to reconnect the projector. When this message appears, turn off
QCast
and reconnect your computer to the projector and re-launch
QCast
.
Remote Control
When you click
Remote Control
on the
Advanced
panel, a virtual keypad appears. It
allows you to control the projector as if using the physical keypad on the projector.
For confirming if the projector is connected to the wireless network, you can re-enter the
Network
Setup
in
QCast
and check if the wireless network’s SSID is displayed.