BenQ LT100, Руководство пользователя

Страница: 13 / 51

Preparing the camera for use 5
Eng
lish
Using touch screen and buttons
You can use the stylus or your finger (may leave fingerprints on the screen) to select options
available from the touch screen. Some operations must work with buttons (such as Play
). This user manual uses “tap”, “circle”, or “swipe” when referring to touch screen
actions and “press” when referring to button actions.
Using an SD card
The camera comes with internal memory for storing captured images, video clips, or audio
files. You can also use an SD (Secure Digital) card to store more files.
• Turn off the camera before removing the battery.
• Please fully charge the Li-ion battery before using it for the first time.
• When the battery is being charged, the status LED indicator flashes in green. When
the battery is fully charged, the status LED indicator is off.
• Use only the specified battery type. Using other types of battery may damage the
camera and invalidate the warranty.
• Ensure that the Li-ion battery is inserted into the product with correct polarity. Incorrect
polarity may damage the camera or cause fire.
• Download all pictures and remove the battery from the camera if you are going to store
the camera for a long time.
• Damage caused by the use of an incorrect power adapter is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.
To install an SD card:
1. Make sure the camera is turned off.
2. Open the battery/card cover.
3. Insert an SD card in the correct direction.
4. Close the battery/card cover.
To remove an SD card:
1. Make sure the camera is turned off.
2. Open the battery/card cover.
3. Lightly press the edge of the SD card to eject.
4. Close the battery/card cover.
• Before initial use of an SD card, tap > > Manage Memory > Format to
format the card first. Remember to slide the write-protect tab (on the side of the SD
card) to the unlock position. Otherwise, all data (if any) on the SD card is protected and
the card cannot be formatted.