FAQ and Troubleshooting
51
I have problem setting up wireless network.
Please follow the instructions below to resolve the problem:
•
Have you enabled the wireless LAN function of the Joybook? Remember to use
the Fn + F12 function key combination to enable it.
•
Click the Start button and select Control Panel, Network and internet Connec-
tions, Network Connections and then double-click Wireless Network Connec-
tions. Make sure the connection status is connected and with appropriate signal
strength. If you do not see the connection status, make sure your wireless device
is set up correctly so your Joybook can pick up the signal.
•
Make sure that your wireless router or access point is broadcasting the SSID.
Refer to your wireless device’s documentation for enabling this broadcasting fea-
ture.
•
If you are doing it correctly, right click on the wireless connection icon
on
the System Tray located at the lower right corner of the Desktop and select View
available wireless network and you should see the SSID that your wireless hub or
device is broadcasting. If not, call your wireless device (router or access point)
manufacturer to get support on how to enable this broadcasting feature.
System
How should I resolve the "Low on Disk Space" or "Out of Disk Space" error mes-
sages.
Windows uses disk space for operations such as caching and virtual memory. The
Joybook may not run reliably if the hard drive’s free disk space drops under
100MB or 200 MB (for window XP). The following instructions will help you free
up the disk space.
1. Click Start and then My Computer.
2. Right click the hard drive icon and then select Properties.
3. Observe how much free space is on the hard drive.
4. To free up hard drive space, click Disk Cleanup and follow the instructions that
follow to proceed.
How do I update the driver?
Please visit BenQ on-line product support (http://Support.BenQ.com) to search
for updated sound driver software.
My system is running very slow. How can I improve performance?
•
System resources are the amount of memory and hard drive space that your Joy-
book can use and can degrade over time slowing the computer. However, you
still can improve the system performance by using the methods below:
•
Close all open programs not being used. Use software program that are abso-
lutely necessary.Try running virus scans and other tools when away from the
desk. Closing software program that are not necessary helps window perform
more efficiently.
•
Prevent background software programs from loading. As software programs
load the small icons on the System Tray, they will be running in the background
and each one consumes valuable system resources. You can follow the steps
below to prevent application programs from running when Windows launches:
1. Click the Start button and then select Run....
2. Type “msconfig” in the Open field. This will open the system configuration util-
ity.
3. Click the Startup tab and then uncheck any task that is unwanted.
4. Click OK and restart the Joybook.
•
Remove programs from the Startup folder. Removing programs from the Star-
tup folder also helps to prevent programs from running when Windows starts
up. To do so, follow the steps below:
1. Right click anywhere in the open area on the Desktop and select New, Folder.
Give the folder a name. This folder will be used later.
2. Right click the Start button and then select Open. A folder named Programs
will appear in the Start Menu window.
3. Double click the Programs folder and then the Startup folder.
4. Right click any icon in the folder and then select Properties. The information
about the icon will appear. this will help you to judge if the program is neces-
sary to be left in the Startup folder.
5. Select unwanted program icons, right click on them and select Cut.
6. Close the open windows to return to the windows desktop.
7. Open the folder created in step 1.
8. Select the Edit and Paste commands in the folder window. The icons that were
cut from the Startup folder are now placed in the folder.
9. Restart the Joybook. The programs removed from the Startup folder will no
longer run when Windows starts. However, you can still run them by double
clicking their icons in the folder created in step 1.
•
Empty the Recycle Bin. You can free up disk space by clearing files you no longer
need from the Recycle Bin. To do so, right-click the Recycle Bin icon on the
Desktop and select Empty Recycle Bin.
•
Delete temporary files and directories. This will increase hard disk space and
reduce the time Window takes to access the hard drive. It will also help to solve
problems associated with spooling print job.
JB7000.book Page 51 Tuesday, July 27, 2004 10:23 AM
