background image

Warranty and Copyright information  

Warranty and Copyright information

Limited warranty

BenQ warrants this product against any defects in material and workmanship, under normal usage and 
storage.
Proof of purchase date will be required with any warranty claim. In the event this product is found to be 
defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be 
replacement of any defective parts (labor included). To obtain warranty service, immediately notify the 
dealer from which you purchased the product of any defects.
Important: The above warranty shall be void if the customer fails to operate the product in accordance 
with BenQ's written instructions, especially the ambient humidity must be in-between 10% and 90%, 
temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the 
projector in a dusty environment. This warranty gives you specific legal rights, and you may have other 
rights which vary from country to country.
For other information, please visit 

www.BenQ.com

.

Copyright

Copyright © 2021 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or 
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, 
manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect 
to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any 
particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make 
changes from time to time in the contents hereof without obligation to notify any person of such 
revision or changes.
*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are 
copyrights of their respective companies or organizations.

Patents

Please go to 

http://patmarking.benq.com/

 for the details on BenQ projector patent coverage.

Содержание Home Entertainment Series W1800i



























































Отзывы: