BenQ EX3200R, Руководство пользователя

Страница: 10 / 37

10 How to assemble your monitor hardware
To Connect the HDMI Cable
Pass the cable through the cable management hole on
the stand arm first. Connect the plug of the HDMI cable
to the HDMI port on the monitor. And then route the
cable via the cable clip right below the input port.
Connect the other end of the cable to the HDMI port
of a digital output device.
The video cables included in your package and the socket
illustrations on the right may vary depending on the product
supplied for your region.
or
2. Connect the audio cable.
Pass the cable through the cable management hole on
the stand arm first.
To Input Audio Signals
Connect the audio cable between the socket on the
rear of the monitor (Line In) and your computer audio
outlet. And then route the cable via the cable clip right
below the input port.
To Output Audio Signals
You are provided with the following options to output
audio from the monitor:
•You may connect headphones to the headphone jack
found on the back side of the monitor.
•If you prefer using external speakers, please also use
another audio cable (usually supplied with the
speakers) to connect the monitor (Line Out) to the
input/Line In jack of the speaker.
3. Connect the power adapter to the monitor.
Pass the cable through the cable management hole on
the stand arm first. Connect the power adapter to the
socket labelled
on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
4. Install the back cover.
Align the back cover with the holes on the back of the
monitor, and press the sides of the back cover against
the holes to lock it into place as illustrated.
To remove the back cover, see How to change cable
connection after initial installation on page 12 for more
information.
2
1