BenQ DC 5530 User’s Manual
Eng
lish
Preparing Your DC E53+ for Use
4
2.3 Using an AC Power Adapter
Using an AC power adapter prevents the DC E53+ from automatically powering off while
transferring files to your computer.
See the preceding section to learn how to charge the battery.
2.4 Inserting and Removing an SD Memory Card
(Optional Accessory)
The DC E53+ is equipped with internal memory, allowing you to record video clips, capture
images, or voice files in the digital still camera. However, you can also expand the memory
capacity by using an optional SD (Secure Digital) memory card to store more files.
1. Always make sure the digital still camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card with the correct orientation as
shown in the illustration.
3. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the camera is
turned off. Press lightly on the edge of the memory card and
it will eject.
Note
Make sure that you use only the AC power adapter specified for the camera. Damage
caused by the use of an incorrect adapter is not covered under the warranty.
Notes
•
Be sure to format the SD memory card with
this digital still camera before using it.
•
To prevent valuable data from being acci-
dentally erased from an SD card, you can
slide the write-protect tab (on the side of the
SD memory card) to “LOCK”.
•
To save, edit, or erase data on an SD memory card, you must unlock the card.
•
While formatting the internal memory, do not insert a memory card into the
camera. Otherwise, the memory card is formatted instead of the camera’s internal
memory.
•
Formatting is an irreversible action and data cannot be recovered at a later time.
Back up your data before formatting.
•
An SD memory card having read or write problems may not be properly
formatted.
