BenQ DC E300, Руководство пользователя

Страница: 33 / 35

BenQ DC 5530 User’s Manual
Eng
lish
Troubleshooting 29
6 T
ROUBLESHOOTING
Symptoms Causes Solutions
The power won’t turn
on. • The battery is out of power.
• The USB cable is not properly
connected to the camera or PC.
• First turn on the PC, then connect
the camera and PC with the USB
cable.
The power turns off
during use. • The battery is out of power.
• Power Saving mode is enabled.
• The battery cover is opened when in
use.
• Switch on the power.
• Do not open the battery cover when
the camera is in use.
The battery power is
being used up too
quickly. • The external temperature is too
cold.
• The battery is not used for a long
time.
• Keep the camera away from extreme
temperatures.
The camera does not
take pictures when the
shutter button is
pressed. • The camera is not in Capture Mode.
• The battery is weak.
• The power has not been switched
on.
• Set the Mode switch to Capture
mode.
• Replace the battery.
• Switch on the power.
The close-up image is
blurred. • Select the correct focus range. • If the subject is within 40 to 60 cm,
select Macro mode.
The flash does not fire. • The camera flash is turned off.
• The light source is sufficient.
• The flash is not fully charged. • Set the flash mode to Auto Flash
mode.
• Wait for the flash to fully charge.
There is something
wrong with the color
of the captured image. • White balance is not set properly. • Set the white balance to Auto mode
or other suitable mode.
The picture is too
bright or too dark. • There is excessive or inadequate
exposure.
• Reset EV bias value.
The LCD screen is not
clear. • The LCD screen plastic cover is
dirty.
• The LCD screen has hot spots.
• Clean the LCD screen with a soft
cloth.
• Hot spots are normal and do not
affect the camera’s functionality.
The camera cannot
download images to
the PC. • The cable is not connected properly.
• The camera is off.
• OS is not Windows 98SE
/2000/ME/XP or the PC is not
equipped with a USB port.
• USB driver is not installed
(Windows 98SE only).
• Check the cable connection.
• Turn on the power.
• Install Windows 98SE/2000/ME/XP
and USB port.
• Install the USB Driver (Windows
98SE only).