Eng
lish
Using the Camera
17
3.7.4 Setting the ISO
With the initial settings, the ISO sensitivity is automatically set according to the brightness of
the subject.
• A higher ISO value increases the image noise. To take clean images, use an ISO value as
low as possible.
3.7.5 Setting the EV compensation
Sets the exposure value manually to compensate for unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong backlighting.
3.7.6 Setting the AEB
Sets the auto exposure bracketing (AEB) to shoot 3 continuous images, each with a different
exposure setting: correctly exposed, underexposed, and overexposed.
3.7.7 Setting the highlight
Makes the subject stand out from its surroundings. The subject will be in focus in three
different ranges:
/
/
.
3.7.8 Setting the sharpness
You can select whether you want the image to have sharp or soft outlines.
Fluor_H
Fluor_L
Adjusts for fluorescent lighting. Corrects the green hue of
fluorescent lighting. Ideal for indoor photos under fluorescent
lighting without a flash.
– Fluor_H: Used for newer daylight fluorescent lighting
– Fluor_L: Used for traditional fluorescent lighting
Custom
For more accurate adjustment or when the light source cannot be
specified. When this option is highlighted, press
to enter the
Custom
mode. Then, point the frame (as shown on the screen) at
something white (for example, white paper) as the reference white
color and press
again to confirm the custom setting.
Icon Mode
Description
Hard
The edges of the image are emphasized. The edges will become sharp, but
noise may occur in the captured image.
Normal The edges of the image are sharp. This is suitable for printing.
Soft
The edges of the image are softened. This is suitable for editing images on
PC.
Icon
Mode
Description
DC_C1060_C850_UM CD EN.book Page 17 Thursday, September 18, 2008 9:12 AM
