Benq DC 2110 User’s Manual
12
3.2. Taking Pictures
There are four steps to take pictures when using DC 2110.
Step 1: Switch on the power.
There will be a beep sound when the camera is switched on and there will be
another beep sound when the camera is ready for shooting. The TFT LCD
Monitor will be able to turned on by pressing the LCD Button 20 after the second
beep sound.
Step 2: Set the Mode Dial at Recording Mode (
)
Please press the Macro Button if you would like to take a close-up shot
(0.2m~0.6m). If the correct shooting mode (normal or macro) is not selected, the
image will be out of focus.
Step 3: Press the Shutter Button HALFWAY
until the AF LED stops blinking.
Step 4: Press the Shutter Button down to complete the shooting.
The AF LED will blink when the camera is storing the captured image. When the
blinking stops you then are able to take another shot.
Note
Please do follow above procedure when you take pictures. To press the
shutter button halfway is to make sure the picture will not be out of focus.
Note
You can use both the viewfinder or the tft LCD monitor to frame the
shooting object. Yet if macro mode is selected, it is suggested to use the tft
LCD monitor.