BenQ DA130, Руководство пользователя

Страница: 34 / 56

26
Using the BenQ Joybee 130 Digital Audio Player
2. Press down the jog wheel and enter the submenu. The LCD display shows 3
options.
• Brightness: High/Medium/Low
• Trubass: From level 1 to level 10
• WOW Volume: from level 1 to level 10
3. Use the jog wheel to select the desired WOW SRS.
4. Press down the jog wheel to confirm your setting. A message of will show on
the LCD dispplay after the selection is done.
Setting the FM Radio Frequency
To set the FM radio frequency, do the following:
1. Enter SETUP mode from the main menu, slide the jog wheel to select FM Channel.
2. Press down the jog wheel and enter the submenu. The LCD display shows 2
options: 87.5~108 Mhz or 76~91 Mhz.
3. Slide the jog wheel and press down to confirm your setting. A message of
will show on the LCD display after the selection is done. Adjust the setting and get
the best radio quality according to the area in which you are.
Setting the Recording Quality
To set the quality of sound while recording from the built-in microphone or the FM radio,
do the following:
1. Enter SETUP mode from the main menu, slide the jog wheel to select Record
Setup. Press down the jog wheel and enter the submenu.
2. Use jog wheel to toggle between Record Quality, Record Source, Recording Device
and Recording Rate. Press down the jog wheel to switch between different options
for each setting.
• Record Source: FM/ Microphone
• Device: Internal (Embedded Flash Memory)
• Rate: 8000Hz/ 16000Hz/ 32000Hz