BenQ DA130, Руководство пользователя

Страница: 26 / 56

18
Using the BenQ Joybee 130 Digital Audio Player
1. Press the button once to set point A to mark the starting point of the section
you would like to repeat.
2. Press the key again to set point B to mark the end of the section. The segment from
point A to B on the track repeats continuously. The icon appears on the LCD
display.
3. Press the button again to cancel the repeat function.
Files on SD card cannot be set as A-B segment, and therefore cannot be used for lan-
guage learning.
Language Learning
1. Right after the A-B segment is set, press the Record button and enter the Lan-
guage Learning mode.
2. Under the Language Learning mode, the player will play the set section first, the
LCD display will show the repeat message to remind users starting to record the
voice. The permitted record time is exactly the same as the A-B segment time.
3. After finishing recording, the player will play the original A-B segment, then play
the recorded voice. The number of th repitition is three. Then the player exits the
Language Learning mode.
Selecting an EQ Mode
The Joybee 130 provides seven equalizer modes to enhance the quality of audio. Select the
EQ mode as described in the following procedure.
4. While under Music menu, press and hold the button for two seconds to dis-
play the submenu of EQ mode.
5. Slide the jog wheel up or down to select EQ, and press down the jog wheel to con-
firm.
6. Slide the jog wheel up or down to scroll through the various EQ modes: Normal,
Rock, Jazz, Classic, Pop, Bass and Speech.