BenQ ARI5_D, Руководство пользователя

Страница: 3 / 7

1
Package Contents
Check the packaging for the following items. If any is missing or damaged, please contact the place
of purchase immediately.
For Your Safety
• Use only the supplied power adapter (WB-18D12FU) and connect only to a suitable outlet
power (100-240V AC, 50-60 Hz). Otherwise the lamp will fail to work normally or result in a
fire hazard.
• In order to prevent any damages to the lamp, do not hang or place any objects over the lamp.
• Route the power cord so as to avoid it from being walked on or pinched by items placed upon
or against it.
• Place the lamp only on a solid, flat and stable surface. Otherwise the lamp may topple over and
result in damages.
• If the lamp will not be used for a long period of time, unplug it from the power outlet.
Installation
1. Place the pedestal base on a solid, flat and stable surface.
2. Insert the metal shaft on the lamp body into the hole on the top of the lamp arm. [Figure
]
When inserting, note the direction of the shaft and ensure that the lamp body is horizontally
seated on the lamp arm.
3. Secure the lamp body to the lamp arm by tightening the two screws using the hex L-key
provided [Figure (1) ], and then press the rubber cover into the groove as illustrated.
[Figure (2) ]
4. Press the cable into the groove on the lamp arm [Figure (1) ]. Note that at least 8 cm of
excess length should be left in order for the lamp body to move freely.
5. Connect the power cord to the power adapter [Figure (2) ] and plug it into a power outlet
[Figure (3) ].
• BenQ Genie e-Reading Lamp body x 1
• Pedestal base with arm x 1
• Hex L-key x 1
• Rubber cover x 1
• Screw x 2
• Power adapter x 1
• User guide x 1
The illustrations in this guide are for your reference only and may look different from the
appearance of the product you purchased.
In case of the following situations, unplug the lamp from the power outlet
immediately and contact the authorized service center or a qualified service
person for inspection or repair:
• When the outer casing of the lamp is broken
• When there are strange odors coming from the lamp
• When the lamp flickers
• When the insulation of the lamp’s wiring is damaged or frayed, and the metal
strings inside can be seen
Do not use the lamp in a humid environment (like in a bathroom or outdoors).
Otherwise the components inside may short-circuit and result in accidents.
This lamp is designed for indoor use only. Do not use it outdoors.
Never disassemble the lamp or remove any components from it, as doing so may
result in accidents and will void the product warranty.
CAUTION
A
B
B
C
C
C