Musto Performance Skiff – Rigging Guide (v0.4)
6 of 19
21. Attach the shroud to the outboard rig adjuster. Five holes
down on the front row is a good start but check
www.mustoskiff.com
for tuning information
22. Now you have both shrouds and lowers attached tension
the rig using the tensioning device and then locate the lower
eye (shown blue arrow in step 19) into the chainplate and
insert the pin. Then remove the tensioning device. NOTE:
Please don’t over tension the rigging; call Ovington Boats if
unsure on required rig tension.
22a. Now tape or cover the chainplate AND the
upper eye that the rig tensioning device was attached to
to prevent the spinnaker snagging
