Musto Performance Skiff – Rigging Guide (v0.4)
5 of 19
15. Before stepping the mast lay it out (on padding, you don’t
want to scratch your new carbon mast) and check that all the
line and wires are not twisted up. Also look up and check you
are not going to hit anything with the mast when you raise it,
especially power lines!! NOTE: The trapeze T terminals go in
the upper slots.
16. Fit the rig adjusters onto the chain plates
17. Attach the lower shroud to the inboard rig adjuster. Five
holes down on the front row is a good start but check
www.mustoskiff.com
for tuning information
18. Check the mast step is clear for the mast to be stepped.
19. Step the mast and loosely the forestay with the rig
tensioning device (not supplied) to the upper eye (arrowed
red)
20. With the weight of the mast now on the trapezes attach
the lower shrouds to the plate on the mast. Do both sides
and the mast will now be self supported.
