Bennett 1K Series, Быстрая установка

Страница: 1 / 20

1 135442 Rev A 9-18-17
1K SERIES ELECTRONIC QUICK INSTALL GUIDE
This quick install guide covers the Bennett Pacific eNVy series dispenser specifications, identification, piping and wiring installation, programming
modes, diagnostic modes, error codes, and spare parts information needed for a Pacific eNVy dispenser built and/or retrofitted with 919
electronics. Please refer to your technical manuals located on the USB provided for detailed information.
IMPORTANT SAFETY INSTRUCTIONS
Bennett Pump Dispensers are to be installed by trained technicians. All technicians must be aware of ALL safety instructions. If you are not a
Bennett trained technician, please contact Bennett Technical Support at 1-800-423-6638 for training information.
As you read this guide, please be aware of the following symbols and their meaning.
Red and White “DANGER” means: If you do not follow the instructions, severe injury or death will occur.
Orange and Black “WARNING” means: If you do not follow the instructions, severe injury or death can occur.
Yellow and Black “CAUTION” means: If you do not follow the instructions, damage can occur to the dispenser.
Blue and White “IMPORTANT” means: Helpful tips and other recommendations on equipment installation, usage, and maintenance should
be observed.
PRODUCT OVERVIEW
STANDARD MODELS
Products .................................................................................................................................................................................... Up to 4 Products Per Side
Hoses .............................................................................................................................................................................................. Up to 2 Hoses Per Side
Unit Type ........................................................................................................................................................................ Straight Grade, Mixer or Blender
Hydraulics ...................................................................................................................................................................................................... Remote Only
Flow Rate ....................................................................................................................................................................................................12gpm/ 40lpm
Inlet / Outlet ............................................................................................................................................. 1-1/2” (3.8cm) dia NPT / .75” (1.9cm) dia NPT
Protocol ........................................................................................................................................ Bennett Current Loop / Generic Current Loop / RS485
EXTENDED BLENDER MOD ELS
Products .................................................................................................................................................................................... Up to 5 Products Per Side
Hoses .............................................................................................................................................................................................. Up to 4 Hoses Per Side
Unit Type ........................................................................................................................................................................ Straight Grade, Mixer or Blender
Hydraulics ...................................................................................................................................................................................................... Remote Only
Flow Rate ....................................................................................................................................................................................................12gpm/ 40lpm
Inlet / Outlet ............................................................................................................................................. 1-1/2” (3.8cm) dia NPT / .75” (1.9cm) dia NPT
Protocol ........................................................................................................................................ Bennett Current Loop / Generic Current Loop / RS485
SPECIFICATIONS
DIMENSIONS
[SK1][LJ2]
Standard (without valance) ................................................................................................................................ 49” (width) x 22” (depth) x 91” (height)
Extended (without valance) ................................................................................................................................ 65” (width) x 22” (depth) x 90” (height)
ENVIRONMENTAL REQUIR EMENTS
Operating Temperature ..................................................................................................................................................... -40

C to +65

C / -40

F to 150

F
Humidity .................................................................................................................................................................................... 0 to 95% Non-Condensing
POWER REQUIREMENTS
AC Power Input, Electronic ................................................................................................................................ 120/240VAC, 50/60 Hz. 350 Watts Max.
DC Power Supply Output .......................................................................................................................................................... +12VDC at 2.0 Amps Max.
+24VDC at 2.0 Amps Max.
Lead-Acid Battery Output ......................................................................................................................................................... +12VDC at 5.0 Amp Hours
Nickel-Cadmium Battery Output ..................................................................................................................................... +3.6VDC at 250 Milliamp Hours