BENISON V5
- 8 -
ADJUSTMENT PROCEDURES
Note:
It is assumed that the unit is supplied with a regulated 8.4 volts during the adjustment procedure. Do not
use a metal screw driver to adjust the ferrite cores as it causes variations in the inductance whilst
adjustments are being performed. Use of the wrong size trimming tools can cause damage to the cores. A
plastic or ceramic trimming tool is recommended.
ADJUSTMENT
1) Required Test Equipment
The following items are required to adjust radio parameters:
1. Regulated power supply
Supply voltage: 5~14V DC
Current: 3A or more
2. Digital multimeter
Voltage range: FS = Approx. 20V
Current: 10A or more
Input resistance: High impedance
3. Oscilloscope
Measurable frequency: Audio frequency
4. Audio dummy load
Impedance: 8 ohm
Dissipation: 1W or more
Jack: 3.5mm
5. SSG
Output frequency: 200MHz or more
Output level: -20dBu/0.1uV ~120dBu/1V
Modulation: FM
6. Spectrum Analyzer
Measuring range: Up to 2GHz or more
7. Power meter
Measurable frequency: Up to 200MHz
Impedance: 50, unbalanced
Measuring range: 0.1W ~10W
8. Audio volmeter
Measurable frequency: Up to 100kHz
Sensitivity: 1mV to 10V
9. Audio generator
Output frequency: 67Hz to 10kHz
Output impedance: 600, unbalanced
10.Distortion meter/SINAD meter
Measurable frequency: 1kHz
Input level: Up to 40dB
Distortion: 1% ~100%
Содержание V5
Страница 1: ...BENISON V5 BENISON V5 VHF FM TRANSCEIVERS Service Manual 1 ...
Страница 17: ...BENISON V5 17 MEMO ...