BENISON JB-4
- 9 –
18
、
Beat frequency set
Under frequency model
，
press [M/SEL] turning knob to choose menu 18, it will appears
“OFFSET 18”
and press [M/SEL]
it will appears
“OFFSET 18”
press digital to set
:for example: beat frequency is 10Mhz,input
“1/0/0/0/0/”
and press
[M/SEL] to confirm and back menu, press [VFO/MR] for exit.
19
、
Beat frequency choose
15
Under frequency mode.
，
press [M/SEL] turning knob to choose menu 19, it will appears
“SFT.OFF 19”
and press
[M/SEL] it will appears
“SFT OFF 19”
turning knob to choose
“OFF/+/-”（
+ when transmit hyper-receive
，
-
when
transmit under-receiver
）
Press [M/SEL] again to confirm and back the menu, press [VFO/MR] for exit. LCD will appears
“+”
or
“-”
what you choose.
20
、
RCT receive CTCSS choose and check
Under frequency model,
，
press
[M/SEL]
turning knob to choose menu 20,it will appears
“RC.OFF 20”
and then press
[M/SEL] it will appears
“RC.OFF 20”
turning knob to
choose menu
“OFF/67～254.1”
（
receive CTCSS
）
,press [M/SEL] to confirm and back menu, press [VFO/MR] for
exit.
21
、
TCT transmit CTCSS choose and check
Under frequency model, press [M/SEL] and turning knob to choose menu 21,it will appears
“ TC.OFF 21”
then press
[M/SEL] it will appears
“TC.OFF 21”
turning knob to choose
“OFF/67～254.1”
（
transmit CTCSS
）
,press
[M/SEL]
again to confirm and back menu, press [VFO/MR] for exit.
22
、
RDQT receive DCS choose and check
Under frequency model, press
[M/SEL] turning knob to choose menu 22
,
it will appears
“RD.OFF 22”
press
[M/SEL
again, it will appears
“RD.OFF 22”
turning knob to choose
“OFF/023N～754I”
,
（
receive CTCSS
）
press
[M/SEL]
again to confirm and back menu, press [VFO/MR] for exit.
23
、
TDQT transmit DCS choose and check
Under frequency model, press
[M/SEL] turning knob to choose menu 23,it will appears
“TD.OFF 23”
and then press
[M/SEL] it will appears
“TD.OFF 23”
turning knob to choose
“OFF/023N～754I”
,
（
transmit CTCSS
）
and then press
[M/SEL] to confirm and back menu, press[VFO/MR] for exit.
24
、
Channel or operating frequency scan.
Under channel or memory calling frequency, press [
F
/
] and [0SCAN] to scan the channel. It will stop to scan and
locked until it found the sign, press any key to exit.
25
、
Saving channel
Under frequency model, choose frequency and other parameter (CTCSS, DCS, beat frequency, orientation and
power)press [
F
/
]and [0SCAN] it will appears
“FUNC 25”
turning knob to choose the saving channel
（
01
～
199
）
and
press [VFO/MR] to save the frequency and back the frequency estate.
NOTE
：
If have sign in the channel,
“★”
it appears
。
26
、
Cancel memory channel
Under memory frequency calling, choose cancel memory ,turn off the radio, press [VFO/MR] and then turn on the
radio, it appears
“DEL?
”
unlash [VFO/MR] and then press [M/SEL] to choose the cancel memory channel.
Manu function
①
press[M/SEL]enter into menu model.
②
Turning knob to choose the menu.
17
③
Press [M/SEL]to enter into the menu to set.
④
After finish set, press [M/SEL] to confirm and press [VFO/MR] to exit the menu.
