BENISON JB-4
- 8 –
8
、
CTCSS
Under frequency model, press [M/SEL] turning knob to choose manual 8, it appears
“CT.OFF 8 ”
and then
press
[M/SEL]
“CT.OFF 8”
turning knob to choose
“OFF/67～254.1HZ”
press [M/SEL]
to back the
manual, and press [VFO/MR]
for exit.
Shortcut
：
Press [
F
/
]
and [8CT] it appears
“CT.OFF 8”
turning knob to choose
“OFF/67～254.1”
press
[M/SEL]
to confirm, and [VFO/MR] for exit.
9
、
DCS
Under frequency mode
，
press[M/SEL]turning knob
to choose manual 9,it will appears
“DC.OFF 9”
and press[M/SEL]
it
appears
“DC.OFF 9”
turning knob to choose
“OFF/023N～754I”
and press
[
F
/
]
choose
“N”/“I”
（
N is obverse
I is reverse
）
press
[M/SEL] again, to confirm and back manual, press [VFO/MR] for exit
.
Shortcut
：
press
[
F
/
]
and
[9DC] appears
“DC.OFF 9”
turning knob to choose
“OFF/023N～754I”
press
[
F
/
]
to confirm,
and [VFO/MR] for exit.
10
、
Choose backlight color
Under any model, press[M/SEL]
turning knob to choose manual 10,it appears
“LIGH.P 10”
and press [M/SEL]
again, it
appears
“LIGH.P 10”
turning knob to choose
“P/B/G”
（
P is purple ,B is orange, G is Blue
）
Press [M/SEL] to confirm,
and [VFO/MR] for exit.
11
、
Save battery
Under any model, press [M/SEL]turning knob to choose menu 11,it will appears
“SAV.OFF 11”
and press [M/SEL] it
appears
“SAV.OFF 11”
turning knob to choose
“OFF/ON”
press
[M/SEL]
to confirm and back the manual, [VFO/MR]
for exit. LCD appears
“
”
when choose
“ON”
.
12
、
Scan model and set.
13
Under any model, press
[M/SEL]turning knob to choose manual 12, it will appears
“SCAN.CO 12”
,press [M/SEL] it will
appears
“ SCAN. CO 12”
turning knob to choose
“CO/TO/SE”
（
Co is carrier wave scan, TO is time scan, SE is search
scan
）
press
[M/SEL]
to back the manual, and
[VFO/MR]
for exit.
13
、
Time for transmit
Under any model, press
[M/SEL]turning knob to choose manual 13 it will appears
“TOT.OFF 13”
and press [M/SEL] it
appears
“TOT.OFF 13”
turning knob
to choose
“OFF/60/120/180”
（
unit
：
second
）
press
[M/SEL]
to back the manual,
and [VFO/MR] for exit.
14
、
Keypad locked
Under any model
，
press
[M/SEL]turning knob to
c
hoose menu 14,it will appears
“ KY.MANU 14”
and than press
[M/SEL] ,turning the knob to choose
“MANU/AUTO”
（
MANU is HM
、
AUTO is automatism
）
press
[M/SEL] to back
manual, and [VFO/MR] for exit.
Shortcut: press
[
F
/
]
2 seconds
，
locked or unlock the keypad.
15
、
STSCAN
（
CTCSS scan
）
Under any model, press
[M/SEL] turning knob to choose
menu 15,it appears
“CTSCAN 15”
and press [M/SEL] begin to
scan, it stop to wink, when find CTCSS, and
press [VFO/MR] for exit.
16
、
DCSAN
（
DCS scan
）
14
Under any model
，
press
[M/SEL]
turning knob to choose
menu 16 ,it appears
“ DCSCAN 16
”
and press[M/SEL]begin to
scan, it stop to wink, when find DTC, and press [VFO/MR] to exit
.
17
、
Frequency step
Under frequency model, press [M/SEL]turning knob to choose menu 17,it appears
“STP.25 17”
press [M/SEL] it
appears
“STP.25 17”
turning knob to choose
“5/6.25/10/12.5/25KHZ”
spacing frequency, and press [M/SEL]To back
the menu, and
[VFO/MR] for exit.
Shortcut
：
press [
F
/
]and [*STEP]it
appears
“STP.25 17”
turning knob to choose
“5/6.25/10/12.5/25”
press [M/SEL]
to confirm, and [VFO/MR] for exit.
