SJ-PM-TF-Luna A01
Benewake (Beijing) Co. Ltd.
Page18
Troubleshooting:
Use the PC supporting Windows operation system.
Cause
②
:
TTL - USB board is poorly connected.
Troubleshooting:
Check the TTL -USB board with the correct and reliable connection with TF-Luna and
PC.
Cause
③
:
Driver of serial port is not correctly installed.
Troubleshooting:
Plug and unplug USB cable again. Try to reinstall the driver or directly download and
install a driver from the internet.
If the PC software still work abnormally, please contact our technical support.
10 Q&A
Q1: Is TF-Luna available with 3.3V or other power supply voltage?
A1: Sorry, it is not available for the time being. The Standard power supply of TF-Luna is 5V
±
0.1V. If you
have any further requirement, please contact our sales person to consult a customization design matter.
Q2: TF-Luna will heat up after operating for a while. Is it broken?
A2: This is the normal operating condition of the product. The temperature of the chip and circuit board
will slightly up after a continuous operation, which is a normal case.
Q3: Can TF-Luna be connected with Arduino or Raspberry Pi for use?
A3: Yes, it can. TF-Luna adopts serial communication protocol so that it can connect to any control board
supporting serial port communication.
