Benetech GM100D, Инструкция по эксплуатации

Страница: 9 / 16

7
c. Adjust measurement result:
When this data was selected, press , the cursor appears in the measurement type field, press
or move the cursor to select the digit of data, and press
UP or DOWN to increase or reduce
the value, press OK to save and return to measurement interface, or press to cancel the
modification and return the previous data.
d. Addition / subtraction:
When this data was selected, press
UP to the +/- appears in the measurement type field, press
the next measurement is added to the previous, In the same approach, press DOWN , the next
measurement is subtracted from the previous one. Press OK to save and return to measurement
interface, or press cancel the modification and return the previous data.
11. Date locking:
a. Data locking introduction:
usually , the instrument keeps and deletes the measurement data in sequence of first in first out.
The first in value will be deleted if total measurement data reach the maximum storage
(eg.30 records). This function enable user to save data permanently except user deletes it manually
from memory.
b. Lock data in mode of measuring:
When measuring, select data, press , the dialog box pops up, select
save button, then
press OK to lock the data, return to measurement interface.
c. Lock/unlock data in Historical record function:
In history data interface, move cursor to navigate the data, then
OK to lock it. And press OK again
to unlock the data.