Benetech GM100D, Инструкция по эксплуатации

Страница: 8 / 16

6
7. Tilt measurement:
Press button
the symbol appears in the function field, press to take the inclination
and the distance.
The inclination sensor measures tilts between
45 .
During the measurement of tilt, the instrument should be held without transverse tilt, as far as possible
within
10 . The accuracy is 0.3 .
8. Auto horizontal measurement:
Press twice, the symbol appears in the functional field. Press button to measure
angel and distance, the summary line displays the result as the direct horizontal distance.
9. Auto height measurement:
Press third times, the symbol appears in the functional field. Press button to take
both sloping sides, the vertical height is displayed in the summary line.
10. Edit Measuring data Function:
Note: this function is only enabled in measurement mode and at least a measured data display in the
screen.
a. Select data:
Press UP and DOWN to select measuring type in measuring process file (left handside of the
screen) , press to locate the corresponding data, the data frame turning yellow indicates the
data has been selected.
b. Re-measure:
When this data was selected, press to re-measure the distance till the result is satisfied. Press
OK or return to measurement interface.