BENETEAU OCEANIS 55 Скачать руководство пользователя страница 215

Страница: 215 / 238

215

146876
Index F

16.2.3 Davits

- The davits enable the launch and retrieval of the tender from the transom. Any other use is dangerous and forbidden.

- The davits are equipped with a pulley block for manoeuvering the tender. This pulley block is manoeuvered by hand.

- A breaker protects the electrical circuit.

Launching the tender

- Put the bung in.

- Secure the pulley's hooks to the front and back of the tender.

- Lower the front then the back of the tender alternately until it touches the water.

Retrieving the tender from the water

- Pull out the bung.

- Secure the pulley's hooks to the front and back of the tender.

- Raise the front and then the back of the tender alternately as high as the pulley block allows.

No one is to be onboard the tender while

launching or retrieving it.

- The davits are designed to support a

maximum load of 250 kg and a tender which is
maximum 3.80 metres long.

- Before heading out to sea, remove the

outboard engine from the tender and store it on
the boat.

- Secure the tender taking account of sea

conditions.

- Secure the outboard engine to the tender

once this is in the water.

ck fittings

Содержание OCEANIS 55















































































































































































































































Результаты поиска

Содержание OCEANIS 55

Отзывы:

Бренды по названию

Популярные бренды

BENETEAU OCEANIS 55, Руководство пользователя

Результаты поиска

Содержание OCEANIS 55

Отзывы:

Бренды по названию

Популярные бренды