BENETEAU OCEANIS 45 Скачать руководство пользователя страница 89

Страница: 89 / 116

Type of motorisation

Your vessel is fitted with an in-board diesel engine.

Transmission type is: Sail-drive / Dock and Go.

Filling up with fuel

- Fill the fuel tank by opening the cap marked "DIESEL", provided for this.

- Fuel capacity: 200 L

- Reservoir location: Port aft cabin.

- Regularly check that the O ring on the filler cap is in good condition, to prevent any water ingress.

- The generator has its own fuel supply valve.

Gauge

- The fuel level is transmitted from the dipstick to the indicator located on the electrical panel.

- Some of the gauges must be calibrated when you first fill the tanks: please consult your dealer.

Deck filler

Gauge

Fuel tank

- The tanks' nominal capacity cannot be fully

used due to the load and the need to maintain
the correct trim. A 20% reserve should be kept.

Engine

Содержание OCEANIS 45





















































































































Результаты поиска

Содержание OCEANIS 45

Отзывы:

Бренды по названию

Популярные бренды

BENETEAU OCEANIS 45, Руководство пользователя

Результаты поиска

Содержание OCEANIS 45

Отзывы:

Бренды по названию

Популярные бренды