manualshive.com logo in svg

BENETEAU OCEANIS 45, Руководство пользователя

Поделиться
Скачать
BENETEAU OCEANIS 45 Скачать руководство пользователя страница 86

 86 

10.1   INFORMATION ABOUT THE RISKS OF FIRE AND OF EXPLOSION OF ENGINES

- Make sure that the coolant is circulating properly.

- Ensure that the engine compartment ventilation air inlets are kept clear.

- Stop the engine and refrain from smoking during fuel tank filling.

- Get your fuel circuit checked regularly by a professional engineer.

- Avoid any contact between inflammable materials and the hot sections of the engine.

- Never switch off or de-energise the electric system when the engine is running.

- Never block the access of the fuel supply valve.

- Do not obstruct or modify the ventilation system.

- Never turn the engine over when the boat is on land.

- Fuel stored outside the tanks (jerrycans, portable fuel tanks, etc.) must be stowed on deck, protected from bad weather and mechanical damage.

- Regularly check that the engine compartment is clean and dry.

Engine water intake valve:

Located directly on the saildrive

Fuel supply valve:

located directly on the tank

Engine

Содержание OCEANIS 45





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды