BENETEAU First 20 Скачать руководство пользователя страница 82

Страница: 82 / 114

189143 RCD-2

Index A

10.1 INFORMATION ABOUT THE RISKS OF FIRE AND OF EXPLOSION OF ENGINES

- Make sure that the coolant is circulating properly.

- Ensure that ventilation openings in the compartment fuel tank are not obstructed.

- Stop the engine and refrain from smoking during fuel tank filling.

- Get your fuel circuit checked regularly by a professional engineer.

- Avoid any contact between inflammable materials and the hot sections of the engine.

- Never switch off or de-energise the electric system when the engine is running.

- Never block the access of the fuel supply valve.

- Do not obstruct or modify the ventilation system.

- Never turn the engine over when the boat is on land.

- Fuel stored outside the tanks (jerrycans, portable fuel tanks, etc.) must be stowed on deck, protected from bad weather
and mechanical damage.

- Regularly check that the petrol tank compartment is clean and dry.

The outboard engine must have a built-in fuel

tank. No space is designed for the stowage of a
separate fuel tank.

Engine

Содержание First 20



















































































































Результаты поиска

Содержание First 20

Отзывы:

Похожие инструкции для First 20

Бренды по названию

Популярные бренды

BENETEAU First 20, Руководство пользователя

Результаты поиска

Содержание First 20

Отзывы:

Похожие инструкции для First 20

Бренды по названию

Популярные бренды