BENETEAU 461 Скачать руководство пользователя страница 228

Страница: 228 / 254

228

197837 RCD-2

Index C

16.2.2 Davits

- The davits enable the launch and retrieval of the tender from the transom. Any other use is dangerous and must be
strictly avoided.

- The davits are equipped with a pulley block for manoeuvering the tender. This pulley block is manoeuvered by hand.

Launching the tender

- Insert the bung.

- Secure the pulley's hooks to the front and back of the tender.

- Lower the front then the back of the tender alternately until it touches the water.

Retrieving the tender from the water

- Pull out the bung.

- Secure the pulley's hooks to the front and back of the tender.

- Raise the front and then the back of the tender alternately as high as the pulley block allows.

No one must be onboard the tender while

launching or retrieving it.

- The davits are designed to support a

maximum load of 180kg and a tender which is at
most 3,10m long.

- Before heading out to sea, remove the

outboard engine from the tender and store it on
the boat.

- Secure the tender taking account of sea

conditions.

- Secure the outboard engine to the tender

once this is in the water.

Deck fittings

Содержание 461































































































































































































































































Результаты поиска

Содержание 461

Отзывы:

Бренды по названию

Популярные бренды

BENETEAU 461, Руководство пользователя

Результаты поиска

Содержание 461

Отзывы:

Бренды по названию

Популярные бренды