BENETEAU 461 Скачать руководство пользователя страница 204

Страница: 204 / 254

204

197837 RCD-2

Index C

14.1 INFORMATION RELATING TO FIRE RISKS AND RISKS OF EXPLOSION

- Make sure that the coolant is circulating properly.

- Ensure that the engine compartment ventilation air inlets are kept clear.

- Stop the engine and refrain from smoking while the fuel tank is being filled.

- Have your fuel circuit checked regularly by a professional engineer.

- Avoid any contact between inflammable materials and the hot sections of the engine.

- Never switch off or cut off energy to the electric system when the engine is running.

- Never block access to the fuel supply valve.

- Do not obstruct or modify the ventilation system.

- Never turn the engine over when the boat is on land.

- Fuel stored outside the tanks (jerrycans, portable fuel tanks, etc.) must be stowed on deck and protected from bad weather and mechanical damage.

- Regularly check that the engine compartment is clean and dry.

Engine water intake valve:

Located directly on the saildrive

Fuel supply valve:

located directly on the tank

Engine

Содержание 461































































































































































































































































Результаты поиска

Содержание 461

Отзывы:

Бренды по названию

Популярные бренды

BENETEAU 461, Руководство пользователя

Результаты поиска

Содержание 461

Отзывы:

Бренды по названию

Популярные бренды