Benelli 302R 2017, Руководство пользователя

Страница: 144 / 454

6 - 13
Periodic maintenance and adjustment
EN
6
TIP
The coolant should be between the mini-
mum and maximum level marks.
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
3. If the coolant is at or below the mini-
mum level mark, remove the coolant re-
servoir cap.
NOTICE
To perform this operation first remove
the right upper fairing.
WARNING
Remove only the coolant reservoir cap.
Never attempt to remove the radiator
cap when the engine is hot.
4. Add coolant or distilled water to raise
the coolant to the maximum level mark,
install the coolant reservoir cap.
NOTICE
If coolant is not available, use distilled
water or soft tap water instead. Do not
use hard water or salt water since it is
harmful to the engine.
If water has been used instead of coo-
lant, replace it with coolant as soon as
possible, otherwise the cooling system
will not be protected against frost and
corrosion. If water has been added to
the coolant, have a Benelli dealer check
the antifreeze content of the coolant as
soon as possible, otherwise the effecti-
veness of the coolant will be reduced.
To change the coolant
1. Place the vehicle on a lat surface and
keep it upright.
2. Place a container under the engine to
collect the used coolant.
3. Remove the radiator cap.
WARNING
Never attempt to remove the radiator
cap when the engine is hot.
2
3
1
1. Radiator cap
1