Benefon TWIG CONFIGURATOR, Руководство пользователя

Страница: 23 / 28

TWIG CONFIGURATOR
23
Choose the desired authorization by checking Location
request authorized , Tracking authorized , or both.
When a telematics message e.g. a location or tracking
request is received, the sender’s phone number is
compared to the numbers in the partners’ list. If a
match is found, the message handled according to the
defined authorization. This means that if the partner
is authorized for e.g. location request, all location re-
quests send by that partner are accepted and your
phone sends back position information automatically.
TWIG ALERT SETTINGS
You can define settings for Twig Aler key, Twig Alert
calls and messages, as well as effects used while Twig
Alert is on.
1. Twig Alert key : You can set for how long the Twig
Alert key needs to be pressed before Twig Alert
application is started, or disable the key. When the
key is disabled, Twig Alert cannot be started by
pressing it.
2. Voice call
-
Number:
Key in the phone number into which
Twig Alert call is made. This number can be
other than the number defined for Twig Alert
messages. The maximum length for the phone
number is 40 digits.
-
Call retry
: You can select whether the Twig
Alert call is tried again or not, in the case the
first call attempt fails. The available options
are 0-5 retries.
-
Call timeout
: Timeout sets the time between
two Twig Alert call attempts. The available
options are 2/5/10/20/30 seconds, or 1
minute.
3. Position message
- Number : Key in the phone number into which
Twig Alert message is sent. This number can
be other than the phone number defined for
Twig Alert calls. The maximum length for the
phone number is 40 digits.
-
Message retry
: You can select how many times
the message is sending is tried again, in the
case the first attempt fails. The available
options are 0-5 retries.
4. Effects
- Backlight : You can set phone backlight to be
always on, always dimmed, or to be used
automatically.
- Volume level : The available options for volume
level are 0-5. When the level is 0, all Twig
Alert application sounds are muted.