Benefon TRACKBOX 2.1 Скачать руководство пользователя страница 7

Страница: 7 / 70

MPTP MESSAGES AND REMOTE CONFIGURATION (OTA) 7

PART A: CONFIGURING SETTINGS FOR THE TRACKBOX

PART A: CONFIGURING

SETTINGS FOR THE TRACKBOX

There are two ways to configure settings for the Trackbox:

•You can use

MPTP commands

and transfer settings

remotely

, over the air by sending a protocol message to

the device.

•You can use the

Benefon Configurator software

for

configuring settings and transfer them to the device

locally

, via the BWTrackbox data/NMEA cable. The

BwTrackbox cable must be purchased separately, it is not
included in the Trackbox sales package.

Benefon Configurator is compatible with Trackbox 2.1
versions starting from GSM 2.Jxxxxx and IOB 040326

Benewin Trackbox software is compatible with former
Trackbox versions.

MPTP MESSAGES AND

REMOTE CONFIGURATION (OTA)

MPTP configuration commands are used when

a remote

up-

date of the device configuration is needed.

Update can include all telematics settings and phone num-
bers, such as emergency numbers, status messages, autho-
rized numbers, GPS operating mode. MPTP updates also
include commands for daily usage, such as location request
and tracking commands.

The remote configuration can be used for transferring the
settings only in case the settings are coded as MPTP messag-
es.

For more information on MPTP messages, please see the
separate documents: Mobile Phone Telematics Protocol
(MPTP), located at the Web site:

www.benefon.com

TRACKBOX 2.1 OPERATING INSTRUCTIONS

Содержание TRACKBOX 2.1






































































Результаты поиска

Содержание TRACKBOX 2.1

Отзывы:

Бренды по названию

Популярные бренды

Benefon TRACKBOX 2.1, Руководство по эксплуатации

Результаты поиска

Содержание TRACKBOX 2.1

Отзывы:

Бренды по названию

Популярные бренды