Electromagnetic Compatibility
This meter meets the electrostatic discharge immunity testing was basic standard IEC6100-4-2.
In addition, the meter meets the electromagnetic emissions requirements as per EN61326.
7KHSXUSRVHRIWKHVHUHTXLUHPHQWVLVWRHQVXUHWKDWPHWHUGRHVQRWDϑHFWRUEHLQJDϑHFWHG
by other devices during operation.
Warning:
ł8VHRIWKLVHTXLSPHQWDGMDFHQWWRRUVWDFNHGZLWKRWKHUHTXLSPHQWVKRXOGEH
avoided because it could result in improper operation. If such use is
necessary, this equipment and the other equipment should be observed to
verify that they are operating normally. The meter may provide a description
or list of equipment with which the meter has been tested in a stacked or
DGMDFHQWFRQ¿JXUDWLRQ
ł8VHRIDFFHVVRULHVWUDQVGXFHUVDQGFDEOHVRWKHUWKDQWKRVHVSHFL¿HGRU
provided by the manufacturer of this equipment could result in increased
electromagnetic emissions or decreased electromagnetic immunity of this
equipment and result in improper operation.
ł3RUWDEOH5)FRPPXQLFDWLRQVHTXLSPHQWLQFOXGLQJSHULSKHUDOVVXFKDV
antenna cables and external antennas) should be used no closer than 30
cm (12 inches) to any part of the meter, including cables specified by the
manufacturer. Otherwise, degradation of the performance of this equipment
could result.