26
27
Chapter 4 Meter Memory Function
The BeneCheck Meter automatically stores up to 180 records, both blood glucose
test results and control test results, each time a test is performed. It also provides
you with 7-, 14-, 21- and 28-day averages of the blood glucose test results.
The memory counts up from M01 through M180. Please follow these directions to
recall stored test results.
Directions :
1. Make sure that no test strip is inserted in the meter.
2. Press the “Front Button” once to turn the meter on. A full display will appear on
screen after a short “beep” sound.
3. Press the “Front Button” once again before the code number appears. The 7-day
average ( 7 DAY.A ) will display on the screen.
4. Followed by 14-, 21- and 28-day average when press the “Front Button”
repeatedly.
5. After the 28-average, the latest stored result M01 appears on the screen.
The memory number increases progressively each time the button is pressed
till M180.
6. To turn the meter off, press the “Front Button” for over 3 seconds and the meter
will make a long “beep” sound. The meter will also automaticallyshut down
after 3 minutes.
Note :
●
Please complete the test procedures within 3 minutes or the meter will
automatically turn off.
●
Do not apply the blood sample on the test strip anywhere other than the
sample inlet.
●
Do not apply the blood sample to a same test strip twice, it will cause
inaccurate test results.
03-RN01-UM-01G BK使用手冊(英文)(文字檔)-226-27 26-27
2009/8/21 下午 04:51:20
Содержание GLU
Страница 1: ......