
Copyright © 2021 BendPak Inc. All rights reserved.
12
of
20
13.
Install Stop Plates (Parts Bag item 2) on the left and right Short Lift Arms (items 6 and 7) and on
both Wheel Forks using two M6 x 16mm Hex Head Bolts (Parts Bag item 4) on each stop plate, as
shown in the figure below.
14.
Measure the inside distance between the left and right arms. Lay the left and right sides of the
Back Wheel Stop out in front of the Long Lift Arms as shown in the figure below and adjust the
inside distance between the carriers to match the Lift Arms as shown below.
Steps 14 and 15
not required on the fixed width GP-7 Version (5174042).