12
Diagnostic Trouble Codes
(DTCs)
(continued)
1st
Digit
2nd
Digit
Diagnostic Trouble Code (DTC)
Description
J1587
(SID)
J1587
(FMI)
Repair Information
4
6
SAL Sensor configuration error
3
13
•
Verify correct ABS configuration using blink codes or other
diagnostic tools.
•
If needed, reset to the default ABS configuration and power-up
to initiate auto-configuration.
5
6
SAR Sensor configuration error
4
13
POWER
6
1
Over-voltage
251
3
• Power supply diagnostic trouble code.
Go to Section F,
page 30.
6
2
Low-voltage
251
4
6
3
Excessive power line resistance
251
13
MODULATOR (MOD)
7
1
MOD1 Hold solenoid shorted or open
42
3, 4,
5, 6
or 12 • Clear DTCs.
• If DTCs return, replace the Bendix
®
TABS-6
™
module.
7
2
MOD1 Release solenoid shorted or
open
48
3, 4,
5, 6
or 12
8
1
MOD2 Hold solenoid shorted or open
43
3, 4,
5, 6
or 12
Static ABS Modulator DTC.
Go to Section H, on Page 32.
9
1
MOD3 Hold solenoid shorted or open
44
8
2
MOD2 Release solenoid shorted or
open
49
9
2
MOD3 Release solenoid shorted
50
7
3
MOD1 ABS modulator dynamic error
7
7
Dynamic ABS Modulator DTC.
Go to Section H, on Page 32.
8
3
MOD2 ABS modulator dynamic error
8
9
3
MOD3 ABS modulator dynamic error
9
8
4
MOD2 Valve configuration error
8
13
•
Verify correct ABS configuration using blink codes or other
diagnostic tools.
•
If needed, reset to the default ABS configuration and power-up
to initiate auto-configuration.
9
4
MOD3 Valve configuration error
9
13
COMMON
10
1
Valve MOD1/2 low-side switch shorted
to ground
7
4
• Check for corroded/damaged wiring or connectors between
the ECU and MOD.
• At the MOD harness connector, verify:
• No continuity from modulator/AUX leads to ground.
• After repairs or if no issues found, then clear DTCs.
• If DTCs return, replace the Bendix
®
TABS-6
™
module.
10
2
Valve MOD3 low-side switch shorted
to ground
9
10
3
ABS modulator dynamic error - all
valves
7
7
Dynamic ABS Modulator DTC.
Go to Section H, on Page 32.
10
4
Excessive ABS activity
1
Dynamic Wheel Speed Sensor DTC.
Go to Section G, on
Page 31.
ELECTRONIC CONTROL UNIT (ECU)
11
1
ECU internal error
254
12
• Check for damaged or corroded connectors.
• Check for damaged wiring.
• After repairs or if no issues found, then clear DTCs.
• If DTCs return, replace the Bendix TABS-6 module.
11
2
ECU configuration error
254
13
• Verify correct ABS configuration using blink codes,
PC-diagnostics or other off-board diagnostic tools.
•
If needed, reset to the default ABS configuration and power-up
to initiate auto-configuration.
Содержание TABS-6 TRAILER ABS MODULE
Страница 34: ...34 NOTES...
Страница 35: ...35 NOTES...
