11
Diagnostic Trouble Codes
(DTCs)
1st
Digit
2nd
Digit
Diagnostic Trouble Code (DTC)
Description
J1587
(SID)
J1587
(FMI)
Repair Information
1
1
No DTCs
1
0
• ABS system fully operational – no DTCs detected
WHEEL SPEED SENSORS (WSS)
2
1
SL Sensor signal valid - large air gap
1
0
Dynamic Wheel Speed Sensor DTC.
Go to Section G, on Page 31.
3
1
SR Sensor signal valid - large air gap
2
0
4
1
SAL Sensor signal valid - large air gap
3
0
5
1
SAR Sensor signal valid - large air gap
4
0
2
2
SL Sensor signal valid - loss of signal
1
1
3
2
SR Sensor signal valid - loss of signal
2
1
4
2
SAL Sensor signal valid - loss of signal
3
1
5
2
SAR Sensor signal valid - loss of signal
4
1
2
3
SL Sensor signal valid – noisy
1
2
3
3
SR Sensor signal valid – noisy
2
2
4
3
SAL Sensor signal valid – noisy
3
2
5
3
SAR Sensor signal valid – noisy
4
2
2
4
SL Sensor shorted or open
1
4 or
5
Static Wheel Speed Sensor DTC.
Go to Section G, on Page 31.
3
4
SR Sensor shorted or open
2
4 or
5
4
4
SAL Sensor shorted or open
3
4 or
5
5
4
SAR Sensor shorted or open
4
4 or
5
2
5
SL Tire diameter out of range
1
13
• Verify correct tire size as desired.
•
Verify proper tire inflation.
• Verify correct number of exciter ring teeth.
• Verify that the Electronic Control Unit (ECU) has the proper
tire size settings.
3
5
SR Tire diameter out of range
2
13
4
5
SAL Tire diameter out of range
3
13
5
5
SAR Tire diameter out of range
4
13
1st Digit
Sensors
2
2 Sensors
4
4 Sensors
2nd Digit
Modulators
1
1 Modulator
2
2 Modulators
3
3 Modulators
3rd Digit
ABS Control Mode
1
Axle
2
Side
3
Dolly-Axle
4
MOD1 Axle - MOD2 Dolly-Axle
5
MOD1 Axle - MOD2 Lift Axle Detection
6
Side (MOD1, MOD2) - MOD3 Dolly-Axle
CHART 6 – ABS COnFIGURATIOnS
Display Odometer Mileage
To display the trailer odometer mileage, apply ignition
power and depress/release the brake pedal seven (7) times
within 15 seconds. Following activation, there will be a
five (5)-second delay followed by a blink code display of
the odometer information (x1000).
Example: 152,431 miles will be displayed as: one (1) blink,
(pause), five (5) blinks, (pause), two (2) blinks.
Zeros will be displayed by the ABS indicator lamp strobing
twice.
Odometer mileage cannot be altered with blink code
diagnostics. Complete odometer information can be
retrieved using a diagnostic tool.
Resetting ABS Configuration
To reset the ABS configuration to the default configuration,
apply ignition power and depress/release the brake pedal
eight (8) times within 15 seconds. Following activation,
the Bendix
®
TABS-6
™
ABS configuration will reset to the
default ABS configuration (2S/1M), and will self-configure
the next time the trailer receives power.
Содержание TABS-6 TRAILER ABS MODULE
Страница 34: ...34 NOTES...
Страница 35: ...35 NOTES...
