Bender RFID113, Руководство пользователя

Страница: 10 / 16

RFID module
10 RFID113_D00303_00_M_XXEN/05.2018
2.2 Operation
Charging is initiated by holding a valid RFID card close to the reader on the
RFID module. The status of the charging system is shown by the 12 RGB LEDs
on the LEDM100 module.
Charging can be terminated when the RFID card is again held in front of the
charging system.
2.3 Integration
The RFID module is integrated solely in conjunction with ICC1612 charge con-
trollers under professional installation. In most cases these charge controllers
implement the functionality of an electric vehicle charging system in which
the RFID module is used to authorize charging transactions.
The LEDM100 module is described in a separate operating
manual, which can be downloaded from
www.bender.de/manuals