. Safety Information
• Improperly performed repairs and the use of spare parts or
accessories which are not recommended by the
manufacturer.
• Cases of disaster brought about by the effect of foreign
bodies and force majeure.
• The assembly and installation of non-recommended
combinations of devices.
This operating manual, and in particular the safety information,
must be noted by all persons who work with the LIM. In addition,
it is essential to comply with the rules and regulations on
accident prevention which are valid for the place of use.
1.3 Personnel
Only appropriately qualified personnel may work on the LIM.
“Qualified“ means that such personnel are familiar with the
installation, commissioning and operation of the LIM, and that
they have undergone training or instructions which is appropriate
to the activity. The personnel must have read and understood
the safety chapter and the warning information in these operating
instructions.
1.4 About the operating manual
This operating manual has been compiled with the greatest
possible care. Nevertheless, errors and mistakes cannot be
entirely ruled out. BENDER companies assume no liability
whatsoever for any injury to persons or damage to property
which may be sustained as a result of faults or errors in these
operating
instructions.
1.5 Hazards when handling the Line Isolation Monitor
LIM2000-1, LIM2000-1CB and LIM2000-3CB
The LIM is constructed according to state of the art and the
recognised safety engineering rules. Nevertheless, when it is
being used, hazards may occur to the life and limb of the user or of
third parties, or there may be adverse effects on the LIM or on other
valuable property. The LIM must only be used
• for the purpose for which it is intended
• when it is in perfect technical condition as far as safety is
concerned
Any faults which may impair safety must be eliminated immediately.
Impermissible modifications and the use of spare parts and
additional devices which are not sold or recommended by the
manufacturer of the LIM may cause fire, electric shocks and
injuries.
Unauthorized persons must not have access to or contact
with the LIM.
Warning signs must always be easily legible. Damaged or illegible
signs must be replaced immediately.
1.6 Inspection, transportation and storage
Inspect the dispatch packaging and the equipment packaging for
damage, and compare the contents of the package with the delivery
documents. In the event of damage during transportation, please
notify the BENDER company immediately.
The LIM must only be stored in rooms where they are protected
against dust and moisture, and spraying or dripping water, and
where the indicated storage temperatures are maintained.
1.7 Important
Please check for correct system and supply voltage !
When insulation and voltage tests are to be carried out, the device
must be isolated from the system for the test period.
In order to check the proper connection of the LIM, it is
recommended to carry out a functional test, before starting the LIM.
Please check whether the basic setting of the devices complies with
the system requirements.
Children or the public must not have access to the LIM.
1. Safety Information
6
7
