ISO SETUP diagram
During the 24 h self test, the relays are not switched over.
i
In the event of a system fault of the ISOMETER®, both the alarm LED 2 and relay K2 will
automatically be activated as system fault relays.
5.3.3 Memory setting (on/off)
Memory: on
= Fault memory is activated. The device must be reset with the RESET
button after clearing the fault.
Memory: off
= Fault memory deactivated (factory setting)
1. Exit
100
200
N.O
N.O
off
N.O Test
N.C Test
Flash
N.O
N.C
on
off
2
.... 1
1. EXIT
2. ISO SETUP
20
IR1575H_D00416_00_M_XXEN / 03.2021
Operation and setting
